Do you have a question about the Gocycle GX and is the answer not in the manual?
Steps for initial setup, including region configuration and component overview.
Details on labelling for USA configurations and an overview of Gocycle components.
Essential pre-ride checks and fundamental safety advice before riding.
Guidance on achieving proper bike fit and advice for the initial riding experience.
Procedures for performing mechanical safety checks on the Gocycle.
Fundamental safety rules and recommendations for riding.
Safety advice for riding in different conditions, including night and low light.
Proper stopping techniques and safety for wet, cold, or icy conditions.
Step-by-step instructions for charging the Gocycle battery.
Important safety and care information for the Gocycle lithium-ion battery.
Details on Pitstopwheels and the fast folding frame and handlebar latches.
How to operate brakes, gears, and pedals for optimal performance.
Information on Gocycle tires, including pressure and changing.
Recommended service intervals and general maintenance guidelines.
Product intended use, limitations, and warnings against modifications.
Maximum weight capacity and factors affecting component lifespan.
Recommended torque values for various fasteners on the Gocycle.
Information on warranty, product limitations, and contact details.
Contents of the small parts bag and instructions for attaching the kickstand.
Step-by-step guide on how to unfold the Gocycle.
Instructions for adjusting the saddle height for comfortable riding.
Guidance on installing front/rear reflectors and assembling the bell.
Identification of battery components like LEDs, buttons, and charging port.
Procedures for charging the battery both inside and outside the frame.
Operation of brakes, gears, and understanding the mini dash display.
How to use the boost button and manage battery power (on/off).
Explanation of different riding modes and their characteristics.
Tips for maximizing motor performance and procedures for folding the Gocycle.
Schedule for maintenance, visual inspections, and firmware updates.
Guide to cleaning, preventing corrosion, lubrication, and shifting adjustments.
Procedures for adjusting the saddle and hydraulic brakes.
Information on tyre care, pressures, and replacement procedures.
Adjusting the headset, stem latch, and frame latch for proper function.
Procedure for adjusting the rear hub bearings if play or tightness is detected.
Using diagnostic tools and uploading logs for technical support.
| Category | Electric Bike |
|---|---|
| Battery | 36V |
| Brakes | Hydraulic disc |
| Gears | 3-speed |
| Max. Speed | 25 km/h (15.5 mph) |