Gocycle GX - Maintenance and Adjustments; Service Intervals and Visual Inspections

Gocycle
®
Owner’s Manual for GX, April 2019
© Karbon Kinetics Limited. All Rights Reserved. 84
11 MAINTENANCE AND ADJUSTMENTS
11.1 Maintenance and Service
Contact your nearest Gocycle dealer for service and maintenance. A list of approved dealers can be
found at
www.gocycle.com/store-locator. Before attempting any maintenance on your Gocycle you
must visit www.gocycle.com/safety for up to date important safety related information such as
Technical Bulletins and the latest owner’s manual.
WARNING: You must perform regular visual inspections of your Gocycle and perform any
recommended adjustments and maintenance in order to ensure that your product is safe to
rider. Please visit www.gocycle.com/safety and review any important Technical Bulletins and
safety information relating to your Gocycle model. You should also download and review the
latest Owner’s Manual from www.gocycle.com/safety. Please note the recommended
inspection and service interval below.
11.2 Service interval
Recommended Service
Interval
Performed By
Distance Ridden
Time
Pre-Ride Checklist
Owner
Before each ride
Before each ride
Visual Inspection / Service
if required
Owner or Authorized
Gocycle Reseller
(recommended)
After first 100
miles/160 kms
2 months after first
ride
Visual Inspection
Owner
Every 500
miles/800 kms
Every 3 months
Visit
www.gocycle.com/safety
Owner
Every 3 months
Check and Update to
latest Firmware Version
Owner
Every 3 months
Visual Inspection / Service
recommended
Owner or Authorised
Gocycle Reseller
(recommended)
Every 2000
miles/3200 kms
Annually