Gocycle GX - Pre-Ride Checks and Safety First

To Next Page

To Previous Page

Gocycle

Owner’s Manual for GX, April 2019

1. Saddle

2. Upper Seat Post Clamp

3. Seat Post

4. Lockshock

5. Rear Pitstopwheel®

6. Rear Disk Rotor

7. Cleandrive®

8. Cranks

9. Kickstand

10. Pedal

11. Frame Latch

12. Frame Seat Post Clamp

13. Frame

14. Grips

15. Shifter

16. Brake Lever

17. Stem

18. Stem Latch

19. Front Pitstopwheel®

20. Fork

21. Motor

22. Front Disk Rotor

23. Charging Port

24. Battery On / Off Button

25. Serial Number

2.1 Pre-Ride Checks

NOTE: Correct fit is an essential element of bicycling safety, performance and comfort. Making the

adjustments to your Gocycle that result in correct fit for your body and riding conditions requires

experience, skill and special tools. Always have your Gocycle dealer make the adjustments on your

Gocycle; or, if you have the experience, skill and tools, have your Gocycle dealer check your work

before riding. We strongly recommend that you use the GocycleConnect App to complete the

Pre-ride Checks.

WARNING: If your Gocycle does not fit you properly, you may lose control and fall. If your

new bike doesn’t fit you, do not ride it.

1. Check for loose joints: 1. Uppers seat post clamp 5-7 Nm. 2. Frame seat post clamp 5-7 Nm. 3.

Seat post does not twist. 4. Rear wheel. 5. Crank arms. 6. Pedals. 7. Front wheel. 8. Handlebar

cannot twist from fork. Check that there are no missing bolts, nuts or fasteners.