Gocycle GX - Headset and Latch Adjustments

To Next Page

To Previous Page

Gocycle

Owner’s Manual for GX, April 2019

Fitting the tyres and tyre tread

orientation

11.10 Adjusting the Headset

From time to time it may be necessary to tighten the headset if it becomes loose. This process is

explained by the following steps:

Check for loose headset. There

should be no play in the steerer

assembly.

Remove front wheel and

carefully place Gocycle onto a

non-slip surface. Grip the

handlebars and rock forwards

and backwards to check for any

fore-aft movement between the

handlebar stem fork assembly

and the main frame as shown.

The connection of the handlebar

stem fork assembly and the

front frame should feel solid and

only be free to rotate with

respect to the main frame.

Forwards

Centreline

groove

Headset

here could

be loose