Gocycle
®
Owner’s Manual for GX, April 2019
© Karbon Kinetics Limited. All Rights Reserved. 43
Place the kickstand on the base of the
Gocycle with the legs facing upwards and
the central hole aligned with the threaded
hole in the frame.
Fit the kickstand bolt as shown using the
shorter end of the 5mm hex key to tighten
the kickstand bolt to 8-10 Nm.
Carefully lift the Gocycle out of the box.
CAUTION: Take care when lifting the
Gocycle out of the box.
To Next Page
Loading...