Gocycle GX - Page 75

Gocycle
®
Owner’s Manual for GX, April 2019
© Karbon Kinetics Limited. All Rights Reserved. 75
WARNING! The motor will continue to operate while the boost button is pressed and the
pedals are rotating. To stop the motor, cease pedalling or release selector A.
Mode
On Demand
LED Mode Display
3
Boost button
Press and hold for motor to operate
Pedals
Must be turning for motor to operate
Top Speed (Motor Cut-out Speed)
EU EPAC - Up to 15.5mph (25km/h)
USA Type 1 and Type 2 - Up to 20mph (32km/h)
10.7.2.4 Custom Mode
Custom mode is enabled when one of the preset modes (City, Eco or On Demand) are modified.
Once a mode has been modified it will need to be synced to the Gocycle manually.
Above the maximum motor speed, the motor will stop. There is no need to press the boost button.
When the pedals cease to rotate or with reduced pedal input, the motor will stop.
Mode
Custom
Boost Button
Customisable via Gocycle App
For more information, please visit
www.gocycle.com/support
Pedals
Motor Start
Maximum Motor Assistance
Top Speed (Motor Cut-Out Speed)
EU EPAC - Up to 15.5mph (25km/h)
USA Type 1 and Type 2 - Up to 20mph (32km/h)
Custom mode enables a rider to edit various mode settings including;
 Pedal effort required for motor to start
 Pedal effort required for maximum motor assistance
 Maximum speed
 Pedalling required for motor assistance ON/OFF (Not enabled for EPAC)
Gocycle is Bluetooth
®
enabled and requires the GocycleConnect to connect via a smart device. The
user can personalize the settings via the App and save the settings to suit the user’s riding style and
assistance preferences.
For more information, please visit
www.gocycle.com/support or contact your local reseller.
WARNING! Depending on your region, certain Gocycle settings may or may not be
available.
Consult your local transport authority for information on legal restrictions.
10.7.2.5 Gocycle GX Power Save
Your Gocycle GX will default to Power Save when the battery has reached a low level. This is after
the dash displays shows one (1) LED.
All riding modes will default to Power Save mode when a low battery level is reached.
In the event that you enter Power Save mode, the motor will operate at a reduced power only when
the boost button is pressed and the pedals are turning. If the pedals cease to turn, or the boost button
is released, the motor will stop.