Gocycle
®
Owner’s Manual for GX, April 2019
© Karbon Kinetics Limited. All Rights Reserved. 96
Using pliers, bend open the split pin
to lock it in place.
WARNING! Do not attempt to
ride your Gocycle without re-
installing the brake pads and
securing split pin.
Doing so may result in injury.
Replace the front brake calliper.
Tighten the calliper securing bolts to a
torque of 6–8Nm.
Ensure that the brake calliper is
parallel to the disk rotor when
tightened in order to prevent disk rub.
To Next Page
Loading...