Godex G330 - Operation Panel And Indicators; LED Operation Panel

18
3 Operation Panel
3.1 LED Operation Panel
018
FEED Button
When you press the FEED button, the printer moves the label to the defined stop position.
If you are using continuous labels, pressing the FEED button will move label stock until you release the button again.
If you are using individual labels, pressing the FEED button will move only one label.
If the label does not stop at the correct position, you need to run the auto-detection function on the label stock, please see Section 3.3 Label
Calibration and Self Test.
LED INDICATOR
FEED BUTTON
LED OPERATION PANEL
LED Indicator Status Description
Green Standby The printer is ready for operation.
Red, Orange
Error
The printer has detected an error.
See Section 3-2. Error Alerts.
LED Indicators