Godex G330 User Manual

5
2 Printer Setup
2.3 Loading The Ribbon
005
A New Ribbon Module Installation
NEW RIBBON
EMPTY RIBBON CORE
Wind the ribbon around the core
1. Attach the ribbon to the empty ribbon core with the adhesive strip at the end of the ribbon.
2. Wind the ribbon around the empty ribbon core for 2 to 3 circles.
Stick on empty ribbon core
Notch on left side
A NEW RIBBON MODULE
RIBBON SUPPLY
RIBBON REWIND
3. A ribbon module is assembled as below.

Godex G330 Specifications

General

Brand	Godex
Model	G330
Category	Barcode Reader
Language	English