Godox AD300Pro - Wireless Flash Modes; High-Speed Sync (HSS)

14
Wireless Flash Mode
AD300Pro can only be set as slave unit (receiver end). Press the menu button to enter.
C.Fn-WL to switch the radio transmission function.
Wireless Mode
Flash Mode
OFF
M/Multi
Radio Transmission
TTL/M/Multi
Flash Mode – TTL Auto flash
This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic). In TTL mode,
the camera and the flash will work together to calculate the correct exposure for the
subject and the background. In this mode, multiple TTL functions are Available: FEC, FEB,
FEL, HSS, second curtain sync, modeling flash control with the camera’s menu screen.
Press <MODE> Mode selection Button and three flash modes will display on the VA
panel one by one with each pressing.
TTL Mode
Press <MODE> Mode Selection Button to enter TTL mode. The VA panel is displayed
<TTL>.
Hight-Speed Sync
Hight Speed Sync (FP flash) enables the flash to synchronize with all camera shutter
speeds. This is convenient when you want to use aperture priority for fill-flash portraits.
Long Press Wireless Button < > for 2
seconds so that < > is displayed.
Please use the X2 series transmitter to
trigger.
• With high-speed sync, the faster the shutter speed, the shorter the effective flash
range.
• Multi flash mode cannot be set in hight-speed sync mode.
• Over-temperature protection may be activated after 20 consecutive high-speed
sync flashes.