21
Positioning and Operation Range (Example of wireless flash shooting)
• Auto flash Shooting with One Slave Unit
• Use the supplied stand to position the Slave unit.
• Before shooting, perform a test flash and test shooting.
• The transmission distance might be shorter depending on the conditions such as
positioning of Slave units, the surrounding environment and whether conditions.
• With a lot of wireless signal interference conditions, if you miss flash, please
change the wireless communication channel.
Wireless Multiple Flash Shooting
You can divide the Slave units into two or three groups and perform TTL auto flash while
changing the flash ratio (factor). In addition, you can set and shoot with a different flash
mode for each firing group, for up to 5 groups.
• Auto Shooting with Two Slave Groups
To Next Page
Loading...
