Godox AD300Pro - Specifications and Upgrades; Firmware Upgrade Process

26
Modelling Lamp (LED)
12W: Colort temperature: 3000-
6000K±500K, Light brightness: 1 to 10
levels.
Optic Slave Flash
S1/S2
Flash Duration Indication
Wireless Flash (2.4G transmission)
Wireless flash function
Slave, Off
Controllable slave groups
5 (A, B, C, D, and E)
Transmission range (approx.)
100m
Channels
32 (1~32)
ID
01~99
Power Supply
Power Supply
Lithium battery pack (14.4V/2600mAh)
Full Power Flashes
Approx. 320
Recycle Time
Approx. 0.01-1.5s
Battery Indicator
Power Indication
Power standby automatically after
approx. 30 minutes of idle operation
Sync Triggering Mode
3.5mm sync line, Wireless control port
Color Temperature
5600±200k
Stable Color Temperature
Change within ±100K over the entire
power range in color temperature mode.
Dimension
Dimension
190*100*90mm
Net Weight
1.25kg (flash head & battery not included)
Firmware Upgrade
• USB connection line is not included in this product. The USB port is a Type-C USB
socket. Type-C USB connection line is applicable.
• As the firmware upgrade needs the support of Godox G3 software, please
download and install the “Godox G3 firmware upgrade software” before
upgrading. Then, choose the related firmware file.
• As the product needs to do firmware upgrade, please refer to instruction manual
of the newest electric version as final.