16
Display Flash Duration
Flash duration refers to the length of time that from flash’s firing to reach the half peek
at maximum. The half peak at maximum is usually expressed at t=0.5. In order to
provide the photographer with more concrete data, this product adopts t=0.1. The
difference between t=0.5 and t=0.1 is shown in the following picture.
Display Flash Duration Operation:
1. Press the <MENU> button to enter C.FN function.
2. Adjust the Select Dial to F6, the t0.1 icon will be displayed on the VA panel.
3. Press <SET> button to enter the adjustment condition.
4. Turn the Select Dial to choose the ON/OFF.
• The flash duration will only be displayed on the AV pane in M mode.
To Next Page
Loading...
