Godox FT-16 User Manual

GODOX PHOTO EQUIPMENT CO.LTD
Wireless Power-Control Flash Trigger
FT-16
Instruction Manual
Foreword
Thanks for purchasing a Godox product.
The wireless power-control flash trigger FT-16 is designed for versatile use. When used on Godox
flashes (with wireless control port), it is not only a flash trigger, but also incorporates multiple functions,
such as, adjusting power ratio, controlling the on-or-off of the buzzer and the modeling lamp or the
AF-assist beam. The trigger set consists of a transmitter (on-camera) and a receiver (on-flash).
Contents
Foreword
For your safety
Parts
Body
Battery
ON/OFF Switch
Power-Ratio Display Mode
Channel Select Switch
Power-Control Group Selection
Other Buttons
Using the Trigger
Adjusting Flash Settings
Triggering Flash
Technical Data
Troubleshooting
Maintenance
For your safety
Before using this product, please read the following safety instructions carefully in order to ensure your

Godox FT-16 Specifications

General

Type	Wireless Flash Trigger
Frequency	2.4 GHz
Channels	16
Sync Port	Yes
Hot Shoe	Yes
Compatibility	Canon, Nikon, Sony, Fujifilm, Olympus/Panasonic
Range/Maximum operating distance	100 meters
Groups	5
Power Supply/Battery	2 x AA batteries

Summary

Foreword

Safety Precautions

Do Not Disassemble or Modify

Warning against altering the product to prevent electric shock or malfunction.

Keep Dry

Avoid contact with water or moisture to prevent fire or electric shock.

Flammable Gas Warning

Do not use near flammable gases to prevent fire or explosion.

Keep Out of Reach of Children

Product contains small parts posing a choking hazard for children.

Malfunction Handling

Turn off immediately if smoke or unusual smell occurs; seek authorized service.

High Temperature Warning

Avoid exposing the product to extreme heat to prevent fire or damage.

Battery Handling Precautions

Follow guidelines for battery use, charging, and disposal to prevent leaks or explosions.

Product Components

Transmitter Body Controls

Details the physical controls and display elements of the transmitter.

Transmitter Battery

Explains the battery requirements and installation for the transmitter.

Low Battery Indication

Describes the display icon and action needed when transmitter battery power is low.

Operating the Flash Trigger

Power Switch Operation

Instructions for turning the transmitter on and off to conserve power.

Power-Ratio Display Modes

Explains the two modes for displaying flash power ratios and how to switch them.

Channel Select Switch

Details how to set the transmitter and receiver to the same channel for communication.

Power-Control Group Selection

Describes how to use the dial to control flash groups for power ratios and functions.

Using the Trigger Set

Other Buttons

Details the functions of the Set, Buzz, LAMP, <->/+, and Test buttons.

Wireless Adjusting Flash Settings

Guide to wirelessly adjusting flash power ratio, buzzer, and modeling lamp.

Wireless Triggering the Flash

Steps to trigger a flash wirelessly using the transmitter and receiver.

Technical Data

Troubleshooting

Maintenance