Warning
Always keep this product dry.
Do not disassemble. Should repairs become necessary, this product must be
sent to an authorized maintenance center.
Keep out of reach of children.
Stop using this product if it breaks open due to extrusion, falling or strong hit.
Otherwise, electric shock may occur if you touch the electronic parts inside it.
Do not fire the flash directly into the eyes (especially those of babies) within
short distances. Otherwise visual impairment may occur.
Do not use the flash unit in the presence of flammable gases, chemicals and
other similar materials. In certain circumstance, these materials may be
sensitive to the strong light emitting from this flash unit and fire or
electromagnetic interference may result.
Do not leave or store the flash unit if the ambient temperature reads over 50.
Otherwise the electronic parts may be damaged.
As this product do not have waterproof function, please take measures of
waterproof in rainy or damp environment.
Turn off the flash unit immediately in the event of malfunction.
Names of Parts
Body
1. Light Body
2. Wireless Sensor
3. Type-C USB Port(only for charging)
4. Reset Hole
5. Angle Adjusting Bracket
6. Push Button of Bracket
7. Lens
8. Modeling Lamp
- 19 - - 20 -
To Next Page
Loading...
