Godox R1 - Battery; Operation; Mode Selection

Battery
1. This flash unit uses non-detachable built-in Li-ion polymer battery which
has long runtime.
2. It is reliably safe. The inner circuit is against overcharge, overdischarge,
overcurrent and short circuit.
3. Take approx. 3 hours to fully charge the battery through 5V/2A charger.
1. Light Setting
Operation
1.1 Power on/off the light
Push the power switch to power the light on
or off. The LCD screen will display the
current information.
CCT
>2500K 100
S:99
>H:354
100
Bicolor mode
1.2 Mode Selection: Bicolor mode/Colorful mode/Situational special
effects mode
Press MOD button to switch different modes: CCT displayed on the
screen means bicolor mode, HIS displayed on the screen means
colorful mode and 1 to14 means situational special effects mode.
Colorful mode Special effects mode
2:
>1:
100
I
I
ON
OFF
- 20 -- 19 -
1.3 MIC: when using music mode, please place the MIC hole closely to
the music source area and adjust the distance according to the effects.
1.4 Magnetic property: As there is a magnet
on the light's back, this light can be absorbed
onto the objects which is made of iron.
1.5 1/4" Mounting socket: this light can be
installed onto the bracket with 1/4" socket.