17
TCM Function
TCM transform function is a particular function that owned by Godox:
TTL Flash value transform into power output value in M mode.
• Set the flash trigger to TTL mode and attach it to the camera. Press the shutter
for shooting.
• Long press the <TCM> button, and the flash value in TTL mode will transform into
power output value in M mode (The displayed minimum value is the set Min.
value).
• Please refer to the C.Fn setting custom functions to see the flash models which
are compatible with TCM functions.
Note: Please choose the relevant models in TCM function in C.Fn custom settings
according to your own flash.
SHOOT Function Settings
Press the <MENU> button to enter C.Fn SHOOT. Press the <SET> button to choose one-
shoot or multi-shoots and press the <MENU> button again to back to the main menu.
One-shoot: When shooting, choose one-shoot. In the M and Multi-mode, the master
unit only sends triggering signal to the slave unit, which is suitable for one person
photography for the advantage of power saving.
Multi-shoots: When shooting, choose multi-shoots, and the master unit will send
parameters and triggering signals to the slave unit, which is suitable for multi person
photography. However, this function consumes power quickly.
APP: Only send triggering signal when camera is shooting (control the flash’s
parameters by smartphone APP)
To Next Page
Loading...
