Gogen IR 237 BTDAB - Timers, Remote App, and System Settings; Configure Sleep Timer; UNDOK App Usage; Equaliser Presets

EN
SLEEP TIMER
To set the sleep timer press repeatedly SLEEP button or select [Sleep] under the [Main menu].
Rotate the VOLUME/OK knob to adjust the sleep time OFF, 15, 30, 45 or 60 minutes and conrm.
NOTE: When the sleep time is set, it shows the [ ] icon with the remaining time at the bottom of the display.
UNDOK
The device gives a feature of network remote by smartphone or tablet in iOS or Android system.
By downloading the assigned app named UNDOK, you can view all the modes the device. Search
UNDOK from Google Play or Apple Store, and install it to your smartphone or tablet.
Before using the UNDOK app, make sure the device and the smartphone / tablet are in the same
WiFi network. Launch the app. The app initializes and scans for Internet Radio in the network. Tap
the device to make the connection.
When prompted, enter the current PIN code. The default PIN is 1234. You can view and edit the
current PIN on the Internet Radio in the menu Select your desired mode in the main page. You may
then control the selected mode on your smartphone / tablet and on the display of the device simul-
taneously.
NOTE: Be aware that if another smartphone / tablet with the app in the same network have access with the device,
the original connection will be cut off.
SYSTEM SETTINGS
EQUALISER
Several preset EQ modes are available: Normal, Flat, Jazz, Rock, Movie, Classic, Pop, News.
A user-dened [My EQ] setting is available. Select [My EQ prole setup] to create your own setup
with custom bass, treble settings.
STREAMING AUDIO QUALITY
Set the streaming quality to Low quality, Medium quality or High quality.
NETWORK
[Network wizard] > Search for available AP SSID (Wireless networks). Then input the password to
connect your wireless network.
[PBC Wlan setup] > Connect the AP that supports WPS (WiFi Protected Setup).
[View settings] > View the information of the currently connected network.
[Manual settings] > Enable or disable DHCP (Dynamic Host Conguration Protocol). Input the SSID,
WEP / WPA key and/or other conguration.
[NetRemote PIN Setup] > View and edit the NetRemote PIN. The default NetRemote PIN is: 1234.
The NetRemote PIN is required when you want to connect a smartphone or Tablet PC to your
device.