Gogen IR 237 BTDAB - Advanced System Settings; Manage Network Profiles; Clear Network Settings; Time and Date Settings

EN
[Network prole] > View the list of registered networks. You can also delete unwanted networks.
Press OK to delete the selected network.
NOTE : The device remembers the last four wireless networks it has connected to, and automatically tries to
connect to whichever one of them it can find.
[Clear network settings] > Clear all the current network settings.
If you enable [Keep network connected] the device will not disconnect from the wireless network,
even if you are in standby mode. This option allows the device to be ready for UNDOK control.
TIME/DATE
[Set Time/Date] > Set the time/date manually.
[Auto update] > Auto-update the time/date from the selected source.
You can also edit the details of the time/date settings: Set format, Timezone, Daylight savings.
INACTIVE STANDBY
Set the desired time, after which the device will go into standby mode automatically in case it is not
controlled.
LANGUAGE
Set the desired language.
NOTE: The default language is Czech. Available languages: English, Hungarian, Czech, Slovak, and Polish.
FACTORY RESET
Resetting all user settings to default values, so that time and date, network conguration,
and presets are lost.
SOFTWARE UPDATE
[Auto-check setting] > Check for new updates from time to time automatically.
Automatic updating is enabled by default.
[Check now] > Search for available updates immediately.
You will be asked if you want to go ahead with the download and installation of an update.
After a software upgrade, all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that the device is plugged into a stable main power connection.
Disconnecting power during an upgrade may permanently damage the device.
SETUP WIZARD
With this function, you can start the setup wizard at any time.
INFO
View the SW version and the Radio ID.
PRIVACY POLICY
View the information of Privacy Policy.
BACKLIGHT
Set the desired time [Timeout], after which the display backlight level will be changed.
Adjust the levels of backlight for both states [On level] / [Dim level].