Example: we want to add following steps after the pre-set
parameters (see point b / 1-4)
Mode Hot air
Time 15min
Temperature 200˚C
Ventilator speed Normal ventilator speed
2.1
Press the “Check” button and select “Options” function
2.2 Press “Add step” or choose the item “Add step” using
arrows and press “OK”
2.3 Set the desired values of the second step in as usual and
press “Select”
Actual setting of all steps and parameters of the cooking process
will show.
You can now proceed in adding further steps, add or delete step, or
adjust parameters of individual steps set by you.
You can leave “Options” any time by pressing the “Esc” button.
The initial screen will show relevant step and the number of set
steps of the cooking technological process.
13
OPERATION MANUAL FOR GOLDSTEIN VISION COOKING CENTRES
To Next Page
Loading...
