2.3.2 Loading of programs „USB to combi oven“
To start the loading follow the chapter 2.3.1 the steps a} and b}.
c)
The screen of choices „Combi oven to USB“ or „USB to
Combi oven“ appears. Choose „USB to Combi oven“ and
then the „Programs“ button.
d) Then you can choose
„Add to existing“ – add the copying programs or
categories to „ALL PROGRAMS“
.
Rewrite all“ - all programs will be completly rewritten in „ALL
PROGRAMS“ section.
Loading Programs (categories) are saved under the original
name in the „ALL PROGRAMS“ section.
IX. Easy cooking
GOLDSTEIN VISION combi-steam ovens offer a unique
technology Easy Cooking which enables even the less experienced
chefs to obtain excellent results. It is not necessary to know in detail all
the cooking process stages and set individual steps. The “Easy cooking”
system is sort of a guide which recommends and sets suitable
technology according to the type of dish and required result.
The operation in “Easy cooking” mode is limited only to the choice
of dish, or gentle “tuning” of the intensity of roasting/baking and color
of the surface and following pressing of the “Start” button. The rest will
be done by the combi-steam oven for us.
The fact that at every stage we can enter the cooking process and
adjust the offered parameters so that the result meets our expectations
is obvious.
If you are satisfied with your final product, it is possible to enter
the selected technology among your favorite programs and use it again
any time to obtain as quality result.
Using EASY COOKING
To select this mode press “Easy cooking”
Choose the desired kind of dish or technology (e.g. “Grilling”)
from the menu
Choose the desired kind of dish in the following step (e.g.
“Chicken”)
23
OPERATION MANUAL FOR GOLDSTEIN VISION COOKING CENTRES
To Next Page
Loading...