26
Continued from previous page.
ART 4/G2+MONITOR
SPECIAL CODES
Door panel 4 0151 0150 0150
Door panel 1 0111 0110 0111
Door panel 2 0121 0120 0120
Camera 1 0141 0140 0140
Video sources available on a monitor (configure only on the master monitor).
Camera 2 0181 0180 0180
Visible Not visible
Factory setting
Door panel 3 0131 0130 0130
0450 0451 0452 0450 (automatic).
Relay 1 From to0200 (0,5s) 0219 (10s) 0205 (3s)
Configuration of the remote activation button (Door panel 1). (Configure only on the master monitor).Relay2
Camera 3 0171 0170 0170
Activate/ deactivate the in all monitors (building).
images recording
Enable Disable Factory setting
Activation times of the outputs (Door panel 1). (Configure only on the master monitor).
Camera 4 0191 0190 0190
Rel 0300 (0,5s) 0319 (10s) 0305 (3s)ay 2 From to
Configuration of the remote activation button (Door panel 1). (Configure only on the master monitor).Relay1
Automatic OFFAlways ON Always Factory setting
Enable/ disable the icon of the main menu in all monitors (building).
0441 0440 0440
Do not show the image on the monitor when receiving a call from the door panel when the monitor is in 'Do not
disturb' mode.
Automatic door opening upon reception of a call on a monitor (configure only on the master monitor).
Activate Deactivate Factory setting
0541 0540 0541 ( )enable
LED lights for night viewing (Door panel 1) during a call or communication process. (Configure only on the
master monitor).
ShowDo not show Factory setting
0481 0480 0480 (show image)
Activated Deactivated Factory setting
0531 0530 0531 ( )activated
Factory setting
Important: .Not available
Factory setting
Delay From to0400 (0,5s) 0419 (10s) 0403 (2s)
Factory setting
Delay From 5 to 5 50 00 (0,5s) 0 19 (10s) 0 03 (2s)
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
Note: Only ART 4/G2+ monitor "V.04 or later."
(1)
(1)
(1)
To Next Page
Loading...
