golmar ART 4/G2+ Monitor User Manual

3
ART 4/G2+MONITOR
SYSTEM OPERATION
-
To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being made
and LED will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears indicating that
a call is being made. At this moment, the apartment's monitors receive the call. If another apartment is called by mistake,
press the button for the correct apartment and the first call will be cancelled.
the door panel
- Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists) without the
visitor knowing and icon displayed on the screen will blink green. To view the image from slave monitors 2 or 3,
press the image. If
the call is not answered within 45 seconds, LED will turn off and the system will become free.
one of the buttons (located above the raised dots for the visually impaired) of the monitor to display
the door panel
- or , push button below of displayed on the screenTo open door of the door panel press the corresponding icon
during the call or communication processes: one press will activate the lock release for seconds and3 the door
panel LED will also turn on for seconds. If vocal synthesis is enabled, a 'Door open' message will be indicated
on the door panel.
3 is
- the push button below shownTo establish communication, press off-the-hook icon on the screen. Door panel LED
will turn off and the led turn onwill .
- 6 to 24Detailed operation of the monitor is described on pp. .
- the push button below shown on the is
pressed door panel
Connection will last for 90 seconds or until on-the-hook icon screen
. When communication ends, LED will turn off and the system will become free. If vocal
synthesis is enabled, a 'Communication is finished' message will indicate that the call is over.
CHARACTERISTICS
- .Image and communication settings menu
- ."HZ" input for calls from apartment front door Up to 8 monitors/ apartments with push button "HZ" activated
at the same time (with system and monitors in standby).
Important:
- eds.Notification l
- .Installer menu
- 4,3" TFT colour screen
-
Hands-free monitor.
- P s for access and selection of menu function.ush button
- Monitor ( bus).with simple installation non-polarised 2 wires
- .User menu
- (m xim 50mA/12V ).Output to auxiliary call repeater a um dc
- .Push buttons for Door release 1 and 2
- .Configuration switches andto toassign the address define whether the monitor is master or slave
If you have the “S5110 ART 4” villa kit with Soul door panel download 4 4 user
manual from the next r i the link Golmar
, “TS5110 ART (cód. 5012212 )”
QR o n web:
h! ps://doc.golmar.es/search/manual/50122124
VERY VILLA 4IMPORTANT ( KIT: S5110 ART )
1
2
TS5110 ART 4
MANUAL
QR

golmar ART 4/G2+ Monitor Specifications

General

Brand	golmar
Model	ART 4/G2+ Monitor
Category	Intercom System
Language	English