Need help?Do you have a question about the GONSIN DCS-3024 and is the answer not in the manual?
Illustrates the connections between system components.
The DCS congress server GONSIN30000S is the core of the system.
Details the functions and indicators of the GONSIN30000S server.
Lists core functionalities of the GONSIN30000S server.
Describes the front-side indicators and controls of the server.
Instructions for installing the 1U high congress server in a 19-inch rack.
General section covering various system component connections.
How to connect the server to a wireless terminal via WAP-30C.
Connecting multiple WAPs for extended coverage or capacity.
Connecting the server to a wireless AP and PC for signal conversion.
Connecting the server to audio amplification systems via RCA or XLR.
Wiring for connecting cameras to the server for video tracking.
Connecting the dome controller to the central control unit via RS485.
Guide to operating and configuring the congress server settings.
Details functions and indicators of the wireless conference terminal.
Introduction to the congress terminal's role and functions.
Lists basic operational features of the wireless terminal.
Describes functions and indicators of the wireless access point (WAP).
Outlines the basic functionalities of the wireless AP.
Details functions and indicators of the battery charging case.
Lists key features of the CHG-16 charging case.
Instructions for connecting the congress server to wireless terminals.
Overview of wireless network advantages and applications.
System uses FS-FHSS for clean frequency selection.
U-Band wireless technology, 908-928MHz frequency range.
Mentions interference and environmental considerations.
Guidelines for installing wireless APs, avoiding obstacles and interference.
Connecting to the GONSIN30000S host via network cable and browser.
Overview of the eight functions available on the web interface.
Displays system info: type, version, speakers, U disk usage.
Modifying host settings like speakers, speech mode, and sensitivity.
Monitoring and selecting optimal frequency bands for communication.
Displays voltage status and IP information of connected devices.
Viewing and managing microphone status, battery, and firmware.
Changing the web interface password for security.
Configuring camera tracking settings for the conference system.
Managing audio files for playback and broadcast.
Proper working environment and maintenance for device longevity.
Guidelines for clean, ventilated, and safe operating environments.
Specific technical requirements for the public environment.
Requirements for the conference management software and operator room.
General| Power Supply | DC 24V |
|---|---|
| Control Interface | RS-485 |
| Loudspeaker | Yes |
| Headphone Output | Yes |
| S/N Ratio | >80dB |
| Signal to Noise Ratio (Microphone) | >70dB |
To Next Page
