Chapter 4 Wireless Network Design
4.1 Introduction
Wireless networks have unique advantages in many application fields. First of all, it is mobility,
which provides applications that are not restricted by cables. Secondly, it is easy to install, only
need to use a network cable to connect to the conference server. Wireless networks are
relatively secure because they communicate in air, transmit signals over a wide range of
frequencies and resemble natural background noise, making it difficult for eavesdroppers to
eavesdrop on data in normal ways.
4.2 Selective frequency hopping technology
The system uses FS-FHSS frequency hopping technology, every time when opening the
microphone will perform the "frequency selection" action, to ensure that every time opening the
microphone can be carried out in the cleanest frequency points.
4.3 Frequency Range
Specifications
This wireless network is based on U-Band wireless communication technology,
so all devices work within the frequency range 908-928MHz(for US standards).
Interference
DCS3024 system will cause interference to the wireless network of PC. Make sure
the wireless carrier of the DCS-3024 system does not overlap with the WLAN
channel.
On-site wireless environment can be accurately measured with professional measuring
instruments or estimated with APP third-party measuring tools.
Note:
Although the system can operate at unlicensed frequencies throughout the country, you must
pay attention to country-specific limits
Make rules and follow them.
4.4 Others
To Next Page
Loading...
