3.2 Pairing with a Bluetooth Device
1. Press the ON/OFF button for 3 seconds until you hear prompt tone, the LED indicator
will show a blue flashing light.
2.
3.
Enable Bluetooth on your Smartphone and search for available Bluetooth connections.
Select “GOODMANS WATERPROOF SPKR” from the list of devices.
4.
When successfully paired, you will hear prompt tone.
5.
Once you have paired the waterproof speaker with a smartphone or Bluetooth device, the
waterproof speaker will remember this device and will pair automatically when the device’s
Bluetooth is activated and in range, you do not need to re-pair any previously connected
devices.
The Waterproof Speaker will attempt to automatically connect to the last device it was
paired with if Bluetooth mode is turned on. If you want to pair it with a new device, please
turn off your last Bluetooth device and then use your new device to search and select the
pairing name.
3.3 Playing Your Music
When your Smartphone or Bluetooth device is paired to the waterproof Speaker, use your
music app to playback your music.
3.4 Using the Line-in Function
Note: When a Line In cable is connected your waterproof speaker will
automatically disconnect from your Bluetooth devices.
If your device doesn’ t have Bluetooth, you can use the Line-in connection.
Open the silicone control panel cover on the back side of your waterproof speaker.
When using the Line-in function, the waterproof speaker will be not waterproof.
Connect the Line-in cable to the waterproof speaker and connect the other end to your
device.
Select your music on your device and Play.
1.
2.
3.
4.
To Next Page
Loading...
