Goodmans CANVAS - Page 6

GMR1886DAB
4.4 DAB mode – choosing menu options
1 If the DAB Digital Radio is in DAB mode, press and hold INFO/MENU
button to enter the menu list to fig.4. Press the –CHANNEL+ button to
select option through the list of menu. Then, stop at your preferred
option and press the SELECT button to confirm. The menu options
are: full scan, manual tune, DRC, prune, system.
2. Full scan – under menu list, press the –CHANNEL+ button to select
“Full scan“ through the list of menu, press SELECT button to confirm
and full scan starts automatically to fig.4. Once a scan is completed,
the radio returns to play the previously-selected station or first station
on the station list.
Note: if no radio station found, it shows “No DAB Station”. For a better
reception, extend the antenna or do the full scan again in another
place.
3. Manual tune – as well as the normal method of scanning, you can also
manually tune to a particular channel/frequency. This can be useful for
adjusting your antenna to achieve the best possible reception and
scanning a particular channel to update the station list.
Under menu list, press the –CHANNEL+ button to select “Manual tune”
through the list of menu, press SELECT button to confirm. Then press
the –CHANNEL+ button to select a particular channel/frequency and
then press SELECT button to confirm the setting to fig.5.
The display shows a live indication of the received signal strength on
the selected frequency. Adjustments to your antenna will be
manifested in the received signal strength displayed.
4. DRC (Dynamic range compression) – this function reduces the
difference between the loudest and quietest audio being broadcast.
Effectively, this makes quiet sounds comparatively louder and loud
sounds comparatively quieter. Options: off(default)/high/low
Under menu list, press the –CHANNEL+ button to select “DRC”
through the list of menu, press SELECT button to confirm. Then press
the –CHANNEL+ button to select a particular setting and press
SELECT button to confirm the setting to fig.6.
Note: DRC only works if it is enabled by the broadcaster for a specific
station.
5. Prune – this removes all invalid stations indicated in the station list with
a ‘?’ in front of the station name.
Under menu list, press the –CHANNEL+ button to select “Prune”
through the list of menu, press SELECT button to confirm to fig.7.
Then press the –CHANNEL+ button to select <Yes>, and press
SELECT button to confirm
DAB
<Full scan >
DAB
<Manual tune >
DAB
<DRC >
DAB
<Prune >
Fig.4
Fig.5
Fig.6
Fig.7