Goodmans CANVAS - Page 7

GMR1886DAB
6. System – the System menu options are: sleep, time, backlight,
language, factory, reset, SW version to fig.8.
6.1. Sleep – when listening to the radio you can set a period of time
before the radio enters ‘standby’ mode.
Note: the radio must be active and not in ‘standby’ mode already.
Under the system menu, press the –CHANNEL+ button to select
“Sleep” through the list of menu, press SELECT button to confirm to
fig.9. Then press the –CHANNEL+ button to select
< sleep off /
15mins / 30mins / 45mins / 60mins / 90mins >, and press SELECT
button to confirm.
6.2. Time – if there are any DAB+ radio signal, the machine will
automatically update the time, there is no signal, can also be set
manually to fig.10.
*Set Time/Date: set hour / set minute / set month / set date>set year >
saved
*Auto update options: update from Any / update from DAB / update
from FM / no update
*Set 12/24 hour: 12hour/24hour
*Set date format: DD-MM-YYYY/MM-DD-YYYY
Cycle through Time menu by press the –CHANNEL+ button, select a
particular option, and press the SELECT button changes.
6.3. Backlight – this radio display has a backlight which can be
adjustable. You can select the time out of the display backlight of your
radio.
Under the system menu, press the –CHANNEL+ button to select
“Backlight” through the list of menu, press the SELECT button to
confirm to fig.11. You can now use the –CHANNEL+ button, then
press the –CHANNEL+ button to select < 10sec / 20sec / 30sec /
45sec
/ 60sec / 90sec / 120sec / 180sec / On >, and press SELECT
button to confirm.
6.4. Language – the language used for display messages can be
selected from below options: English | Francais | Deutsch | Norsk |
Nederlands
Under the system menu, press the –CHANNEL+ button to select
“Language” through the list of menu, press the SELECT button to
confirm to fig.12. Cycle through Language menu by press
the –CHANNEL+ button, select and stop at a particular language,
press the SELECT button to confirm.
DAB
<System >
System
<Sleep >
System
<Time >
System
<Backlight >
System
<Language >
Fig.9
Fig.10
Fig.11
Fig.12
Fig.8