5.3 Set the source type to AUX in
The volume output is effected by the volume level on the audio source
EG: Phone or laptop, so make sure that is set to about 70-80% (not
too loud to avoid distortion).
Adjust the volume on the unit to the required listening level.
2. Press play on the extemal device to begin playback through
GDBTSPK30.
1. Press mode button on the remote control, or press the M
button on the top of GDBTSPK30. to set AUX in mode. The LED
indicator will show green.
5.2 AUX IN MODE
Connect to an external audio device
Connect one end of the 3.5mm audio cable to the external audio
devices headphone output and the other end to the AUX input of
GDBTSPK30.
To Next Page
