1. STANDBY / ON
Switches the system between on and stand-by.
2. MUTE
Mutes the audio.
3. PRESET / PROGRAM
CD: Selects programmme function and
enters tracks into the programme memory.
DAB : Quick press - selects preset recall.
Long press - selects preset store.
4. MODE
Select DAB , CD or AUX function.
5. AUTOTUNE / PLAYMODE
CD: Cycles CD playback mode.
DAB : Quick press - no effect.
Long press - scans the DAB band and creates a
new station list.
6.UP
Display the next station in the DAB station list.
7.DOWN
Display the previous station in the DAB station list.
Goodmans Product Information Helpline 0870 873 0080
Sets a sleep time.
9. SKIP +
CD: To search forward or skip to the next track.
DAB : To select the next station in the station list
10. PLAY / PAUSE
CD: Starts playback from stop mode.
Pauses playback.
DAB: performs the same functions as the select
button on the front panel
11. SKIP -
CD: To search backward or skip to the previous
track.
DAB:
To select the previous station. in the station
list
12. STOP
CD: Stop playback or cancel programme mode.
DAB: Select secondary broadcast.
13. VOLUME +
Increase the volume.
14. VOLUME -
Decrease the volume.
POWER SOURCE
AC POWER SUPPLY
After all other connections have been made. Connect
the AC power cord of the system to the wall outlet. The
system will be in standby mode.
INSERTING BATTERIES INTO THE
REMOTE CONTROL
Insert batteries (type R -03 or UM-4 AAA) into the
remote control as shown in the battery compartment.
CAUTION:
• Replace batteries if the remote control fails to work.
• Remove batteries if they are exhausted or not to be
used for a long time.
• Batteries contain chemical substances, so they
should be disposed of properly.
5
REMOTE CONTROL
To Next Page
Loading...
