Goodmans MICRO1106DAB - Basic Function; Headphones; Loading a CD; Playing a Disc

SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
• Press
or SKIP/SEARCH
button repeatedly until
the desired track appears in the display.
If playback is stopped, press
PLAY/PAUSE button
to start playback.
To search for a particular passage during playback
• Press and hold
or SKIP/SEARCH button and
release it when the desired passage is located.
PROGRAMME TRACKS
Up to 20 tracks can be stored into memory for playback in
any desired order .
1. In stop mode, press PROG button on the unit or
PROGRAM button on the remote control to enter
programme setting. CD P-01 will show in the display
and 00 will flash.
2. Press
or SKIP/SEARCH/TUNING button to
select the first required track.
3. Press PROG button on the unit or PROGRAM
button on
the remote control to store the selected track. 00 P --
02
will show in the display.
4. Repeat steps 1 to 3 to select and store all required
tracks (upto 20 ) into memory.
5. Press
PLAY/PAUSE button to play the
programmed tracks.
Press PROG button on the unit or PROGRAM button
on the remote control in stop mode to review the
programmed track list.
6. Press
STOP button in stop mode to clear the
programme. CD PROGRAM will disappear from the
display.
Notes:
The programme is automatically cleared when the CD
compartment is opened.
Programme creation can only be performed in the CD
STOP mode
CD PLAYBACK MODES
If programmme mode is not being used :
Press AUTOTUNE/P.MODE button
to activate NORMAL /
REPEAT 1 / REPEAT ALL / RANDOM / INTRO
PLAYBACK modes.
If programme mode is being used:
Only NORMAL / REPEAT 1 / REPEAT ALL and INTRO
modes are available.
REPEAT 1:
Repeated playback of the current playing track until the
STOP button is pressed or the function is cancelled.
REPEAT ALL:
Repeated playback of all tracks on the current playing disc
until the STOP button is pressed or the function is
cancelled.
RANDOM:
All tracks on the CD are played in random order until all
have been played once.
INTRO:
The first 10 seconds of each of the remaining tracks on the
disc are played in sequence.
SWITCHING THE SYSTEM ON
• Press POWER button to turn the system on.
SWITCHING THE SYSTEM TO STANDBY MODE
• Press STANDBY/ON button on the remote control.
The clock will show in the display.
VOLUME CONTROL
Rotate / Press
VOLUME + knob/button on the unit or
remote control to increase or
VOLUME - knob/button
on the unit or remote control to decrease the volume
level.
The volume ranges from the minimum of “0”(MIN VOL) to
“max” (MAX VOL) and is indicated on the display.
IMPORTANT The volume control
on the front panel does not rotate and should
only be moved gently to the left or right to
alter the volume setting , excessive force will damage the
control.
To mute the audio temporarily
Press MUTE button on the remote control.
Playback will continue without sound and a MUTE symbol
“ ” will show in the display. To restore audio, press
MUTE button again or adjust the volume control.
PRESET EQUALISER
Press EQ button to select the desired sound effect:
CLASSIC, POP, ROCK,JAZZ or FLAT
LISTENING THROUGH HEADPHONES
A stereo headphone socket is provided for private
listening,connect a pair of low impedance(8-16OHM)
headphones or earphones (not supplied) with 3.5MM
stereo jack plug, when headphones are connected the
main speakers are automatically disconnected
USING THE CD PLAYER
LOADING A CD
1. Press MODE button on the unit or remote
Control to select CD mode.
2. Press OPEN/CLOSE to open the CD door.
3. Locate a CD with the label facing up onto the centre
capstan until a click is heard.
4. Close the CD door. The player will automatically start
playing.
5. To remove the CD, press the
STOP button and then
the OPEN / CLOSE button, grasp the CD by the edge,
and carefully remove it from the player.
NORMAL DISC PLAYBACK
1. With a CD loaded , press
PLAY/PAUSE button to
Start playback.
2. The track number and elapsed playing time of the
current track appear in the display.
3. To pause playback press
PLAY/PAUSE button.
The elapsed time will flash in the display and playback
is paused.
4. To resume playback press
PLAY/PAUSE again.
5. To stop playback, press
STOP button.
Goodmans Product Information Helpline 0870 873 0080
6
BASIC FUNCTIONS