Goodview M Series - Touch Aid; Sync Setting

10
›Off - scroll text, no matter included or not in the playlist, will not appear on the screen.
›On - scroll text, if included in the playlist, will be displayed on the bottom of screen.
4.1.8 Touch Aid
Closed by default. When turned on, the icon appears on the upper left corner of the
APK main interface. You can also call the touch aids by clicking left twice in the
upper left and lower left corners of the APK main interface.
›Settings: Automatically enter the OSD menu interface after clicking “settings”.
›Exit: Click the “exit” to exit the interface and enter the Android system.
›Play: Play the program automatically after clicking “playback” (provided the
terminal has imported the program).
›Hidden: After clicking “Hidden”, the touch assist tool icon will automatically
hidden and does not display.
4.1.9 Sync Setting
Terminal support synchronization function, multiple terminals can synchronize
broadcast programs. The synchronization function can be set up here. Support 2.4G
sync and internet sync.
The following conditions must be met for the implementation of the synchronization
function:
Set one of the machines as the host and the rest as the slave.
The master and slave must be on the same LAN.
The master-slave machine im
ports the same program.
The master and slave must set the same synchronization group number and
synchronization mode.
Sync setting:
·Sync Role:
Host: When using the synchronization function, the current terminal is set as the host,
and other slaves will play the same or different programs simultaneously with the host.
Only one host can exist in the same area.