Goodwe ABD Series - Page 17

17
Step 1 Strip the conductor wiring.
Step 2 Remove the waterproof cover using the included cap removal tool.
Step 3 Insert the desired conduit and corresponding adaptors, ttings, and bushings.
Step 4 Insert the conductors into the device and tighten the conduit.
4.4.2 Connecting the AC Conductors (Load)
1 2
3
2
1
3
5
4
10N·m
5
1.6N·m
4
5
Step 1 Strip the conductor wiring, crimp the conductor with appropriate wire connector.
Step 2 Remove the waterproof cover using the included cap removal tool.
Step 3 Insert the desired conduit and corresponding adaptors, ttings, and bushings.
Step 4 Insert the conductors into the device and tighten the conduit.
4.4.3 Connecting the AC Conductors (Inverter)
18-22mm
18-22mm
18-22mm
10-12mm
3
1
4
4
2
4
10N·m
4
1.6N·m
2