Need help?Do you have a question about the Goodwe BCL9600 and is the answer not in the manual?
Provides physical dimensions (width, depth, height) for the battery enclosure, with and without feet.
Lists all components included with the battery enclosure, such as bolts, wires, and screws.
Lists recommended tools for installing the battery enclosure, including safety gear and electrical tools.
Specifies suitable locations and environmental conditions for installing the battery enclosure.
Details steps for preparing the battery enclosure before installation, including removing covers and attaching feet.
Instructions for securely mounting the battery enclosure to a wall, ensuring it is level and sealed.
Guide on how to insert GoodWe SECU-A battery packs into the enclosure, from bottom to top.
Explains how to configure DIP switches for single and multi-battery systems for BMS communication.
Instructions on using the SolarGo app to select the correct battery model for successful BMS communication.
Details the connections between BMS ports, battery ports, and cable labels for GoodWe SECU-A.
To Next Page
General