How to fix Over Temperature error on Goodwe GW8000-MS Inverter?
If your Goodwe Inverter is showing an 'Over Temperature' error, turn off the DC switch and disconnect the AC and DC connectors. Try to reduce the ambient temperature around the inverter or move it to a cooler location. If the problem continues, further assistance is needed.
What to do if Goodwe GW8000-MS displays Ground I Failure?
If your Goodwe Inverter displays a 'Ground I Failure' message, first turn off the DC switch, then disconnect the DC and AC connectors and check the insulation of the PV string wiring to earth. Restart the DC switch. If the problem persists, further assistance is needed.
General| Model | GW8000-MS |
|---|---|
| Rated Power | 8000 W |
| Number of MPPT Trackers | 2 |
| Max. Short Circuit Current per MPPT | 15 A |
| Nominal AC Power | 8000 W |
| Max. AC Power | 8000 W |
| Max. AC Current | 36.4A |
| AC Output Voltage Range | 180-280V |
| AC Voltage Range | 180-280V |
| Nominal Grid Frequency | 50 Hz / 60 Hz |
| AC Output Frequency | 50 Hz / 60 Hz |
| Total Harmonic Distortion (THD) | < 3% |
| Max Efficiency | 98.4% |
| DC Connection Type | MC4 |
| AC Connection Type | Terminal Block |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Nominal AC Voltage | 220V/230V |
| Operating Temperature Range | -25 °C to +60 °C |
| Cooling | Natural Convection |
| Power Factor | >0.99 (Adjustable 0.8 leading to 0.8 lagging) |
| Cooling Method | Natural Convection |
To Next Page
