10 11
Getting Started
SD CARD + BATTERY SETUP
1. Unlock the door latch and flip the door open.
2. With your camera o and battery removed, insert the SD card into
the card slot with the label facing the battery compartment.
You can eject the card by pressing it into the slot with your fingernail.
Getting Started
3. Insert the battery.
4. Connect your camera to a USB charger or computer using the
included USB-C cable.
It takes about 3 hours for the battery to fully charge. The camera
status light will turn o when it’s done. To learn more, see
Battery Information (page 107).
To Next Page
Loading...
