Gordon 91956 - Using as a PC Camera; Download and Expansion to 1.3 M; Connecting the binoculars to the Computers USB port

SKU 91956 Page 11
a.
Remark !!!
If your computer can’t run automatically, please click
“Start” button and choose “Run”, then browse the
CD-Rom drive and click “Setup”.
Using as a PC Camera•
Power on the your binoculars.
a.
Connect the binocularsb. to your PC by provided USB
cable. The camera will be power on automatically.
Then clip to open the MyDSC2 folder form desk of c.
you PC.
And then clip the PCC cam to run the camera as a
d.
PCCam. PCC will show on the LCD display.
Download and Expansion to 1.3M.1.
Connecting the binoculars to the Computer’s USB •
port.
Power off the
a. binoculars.
Connect the USB cable (B type) to your computer’s b.
USB port above drawing.
Connect the USB cable (A type) to your binoculars as
c.
above drawing.
Your computer will automatically recognize the new d.
device.
Follow the steps on your screen to install the c.
software, then restart your PC.
Successful installation will create “MyDSC2” folder on
d.
the desktop of PC.
Brought to You by www.snapwhole.com