Starting the cooking process
Start the cooking process by pressing the start | stop key.
Until the set temperature is reached for the first time, the current and the
set temperature will alternate on the display unit. The temperature symbol
flashes at first. When the desired temperature is reached, it goes off.
INFORMATION!
If no timer function is selected, cooking time will appear on the display unit. A short acoustic
signal is emitted when the oven reaches the selected temperature.
Extra gratin
You may only activate this function 10 minutes after the start of the
cooking process (the symbol will appear on the display
unit).
Press the KNOB to open settings. Rotate the KNOB to the sign
and confirm your selection. Rotate the KNOB again and
select the fully lit sign. Confirm your selection. The function is now
activated. Cooking time of 10 minutes (10:00) will appear on the display
unit.
To change the duration, press on the KNOB twice and rotate it to adjust
the time (max. 30 min). Confirm your selection.
The function is used in the last stage of the cooking process when you
add sauce/wet rub or dry rub onto the food, or when you wish to
additionally brown the crust. A golden-brown crust will form on the dish
during the gratin process, which protects the food from drying out, while
also imparting a more pleasant appearance and better flavour.
INFORMATION!
The function can also be switched off while it is in progress. Rotate
the KNOB to setting . Choose the dimmed sign and
confirm it by pressing on the KNOB.
Steam injection during the baking process
INFORMATION!
This function will be active if you have selected a system with steam
injection during the baking process. If you have not set this function,
you can still activate it during operation.
Press the KNOB to open settings. Rotate the KNOB and select the
sign so that it is fully lit, and confirm it (see chapter
Choosing the Settings, Professional Mode, Steam Injection During
the Baking Process).
The function can also be switched off while it is in progress. Rotate
the KNOB to the setting and press on the KNOB to
confirm. Choose the dimmed sign and confirm it by pressing on
the KNOB.
28
To Next Page
Loading...
