Gorgy Timing RADIO TIMING GTC - Reviewing the Weekly Program Settings

53
MDE-Radio-Timing-GTC-3080V2.3
5.4. REVIEWING THE WEEKLY PROGRAM SETTINGS
► Using the “MENU” button, select
the menu:
► Conrm by pressing «ENTER»: Depending on the content of the circuit, one of the
three screens below appears and the indication C1 ashes.
► Case of ON/OFF existing events.
Note: 008 is the number of
program steps used (An ON /
OFF event = 2 steps)
► Case of PULSE existing events.
Note: 004 is the number of
program steps used
► Case of an empty circuit.
► Using the «+» or «-» button, select the circuit to be reviewed then conrm by «ENTER»
button.
The rst program step is displayed
on the last row of the screen
For instance, for an ON / OFF
circuit:
DISPLAYING
AN EVENT
FRI 22 FEBR 2013
11:42:45 (LOCAL)
DISPLAYING
AN EVENT
REL. C1 008 ON/OFF
DISPLAYING
AN EVENT
REL. C1 004 PULSES
DISPLAYING
AN EVENT
REL. C1 EMPTY
DISPLAYING
AN EVENT
REL. C1 008 ON/OFF
C1= ON MON 08:00
ENGLISH