1.Device Introduction
G626 is a great tracking device which is designed by Gosafe Company Limited. It combines GSM and
SMS with GPS to locate your belongs. As its compact size and long life battery, G626 can be easily
installed at somewhere concealed in your vehicle motorcycle and boat to track and locate them.
There are GSM modem, GPS receiver, control PCB, microprocessor, power circuit, rechargeable
battery and so on. Before starting G626 installation, please prepare one SIM card which works based
on GSM network that is offered by GSM mobile operating agency and can work with GPRS.
G626 is easy to install device even nonprofessionals can install this device. You only need to get
the valid data SIM Card. Disassemble the G626 and Insert the SIM card. The system have internal
movement sensor which controls the power management of the device. The power save mode
for G626 includes 9 types, which you can choose what you like. And also the working mode is
changeable. For further details, please refer to "Commands for device setting".
There are two covers of G626 for you to choose. One cover is normal cover, and another cover with
magnet.
Please note that if the G626 works at non-continue-working mode, you cannot make real-time
communication with the device if it is in sleep state. G626 will wake up and react by the operating
cycle you made.
G626 is equipped with highest available GPS uBlox modules and able to use A-GPS (Assist GPS)
technology to give help connecting the device with GPS faster with more accuracy.
1.1 Physical Appearance
Description Device Components Packing list
Pictures
To Next Page
Loading...
