Gosafe G626 - Modify User Password; Set User Upload Mode, Interval and Type

No matter the telephone No. in command with or without country code, it is acceptable. Device will
reply a message for confirmation on after receipt of setting command to the set mobile phone, from
which the setting command was sent.
Example:
Setting command without country code in telephone No.: 1234,UNO;13912345678
Setting command with country code in telephone No.: 1234,UNO;+8613912345678
Reply:
G626 V1.05
UNO: 13912345678
Or
G626 V1.05
UNO: +8613912345678
3.2 Modify User Password
Command Format:
**** , UPW ; xxxx
Explanations:
****: user old password (4-digit)
, : command delimiter
UPW: Command Control Word
; : command delimiter
xxxx: user new password(4-digit)
Only if this command is sent by user No., the system can process this command. After password
modification successful, please do memorize your new password.
Example:
1234,UPW;5678
Reply:
G626 V1.05
UPW: 5678
3.3Set User Upload Mode, interval and type
Command Format:
**** , UUM ; xxS ; G ; T
Explanations:
****: user password (4-digit)
, : command delimiter
UUM: Command Control Word
; : command delimiter
xx: SMS interval
S: command control word (interval in Second, Minute, Hours)
;: command delimiter
G: Command Control Word (Mode)
;: command delimiter
T: Type of upload (Text, with hyperlink)