Gossen MetraWatt PROFITEST MASTER Series - Instrument Settings

Gossen Metrawatt GmbH 27
8 Instrument Settings
SETUP
LED and LCD test menu
Rotary switch balancing
Brightness/contrast menu
Calibration date
Display: date/time
Display: auto shutdown
Display: auto shutdown
of display illumination after 15 s.
of the tester after 60 s.
1
2
3
and battery test menu
0b
0a
0
Return to main menu
MAINS LED: test green
MAINS LED: test red
UL/RL LED: test red
RCD-FI LED: test red
Cell test
Inverse cell test
Hide all pixels
Show all pixels
Acoustic signal test
1
Return to main menu
Brightness/contrast submenu

Set time 
Default settings 
Language for
user interface

3
3a
3b
3c
3e
Set date 
Duty cycle
for display illumination / tester
0b
Return to submenu
0a
Display Illumination On-time
Time, On-Time and Default Settings
Menu Selection for Operating Parameters
LED tests LCD and acoustic signal tests
Test Instrument On-Time
3f
4
No automatic shutdown,
continuously on
DB MODE submenu

3g
Current inspector
Time, language
Firmware/software info s. page 98
Bluetooth® submenu
3h
Brightness and Contrast Settings and Bluetooth®
Create or select inspector
(deletion via ETC only)
Distributor structures 
3d