30 Gossen Metrawatt GmbH
Adjusting Brightness and Contrast
DB-MODE – Display of
the Database in the Text or
ID Mode
DB MODE functionality is
available as of test instru-
ment firmware version
01.05.00 and as of ETC ver-
sion 01.31.00.
Creating Structures in the TXT MODE
The database in the test instrument is set to the text mode as a
default feature and “TXT” appears in the header. You can create
structure elements in the test instrument and label them in plain
text, e.g. Customer XY, Distributor XY and Circuit XY.
Creating Structures in the ID MODE
You can work in the ID MODE as an alternative, in which case “ID”
appears in the header. You can create structure elements in the
test instrument and label them with any desired ID numbers.
Structures can be created in the test instrument in either
the text mode or the ID mode.
In contrast to this, designations and ID numbers are
always assigned in the report generating program.
If no texts or ID numbers have been entered to the test instrument
when creating structures, the report generating program creates
the missing entries automatically. These can then be edited in the
report generating program and transferred back to the test instru-
ment if required.
Switching Bluetooth® On/Off (PROFITEST MTECH+/PROFITEST
MXTRA only)
A Bluetooth® keyboard can be connected via the Bluetooth®
interface.
Only Bluetooth® Classic keyboards (also known as
Bluetooth Basic Rate / Enhanced Data Rate – BR/
EDR) are supported.
Bluetooth® Low Energy keyboards (also known as
Bluetooth® Niedrigenergie – LE) are not supported.
Tested and approved keyboards: Logitech K380, Keychron K3
We are unable to offer any guarantees for use with other devices.
Jump back to
Increase brightness
Decrease brightness
Increase contrast
Decrease contrast
previous menu
1
4
2
3
When Bluetooth® is
active (= ON), the
Bluetooth® icon
and an interface
icon appear in the header
instead of MEM.
A closed interface icon indicates
an active Bluetooth® connection
with data transmission.
To Next Page
Loading...
