94 Gossen Metrawatt GmbH
Overview of Test Sequences and their Test Steps
PRCD-S, single-phase: 11 test steps
PRCD-S, 3-phase: 18 test steps
PRCD-K, single-phase: 5 test steps
Selection Examples, PRCD-S Test Sequence (single-phase) –
11 Test Steps
Simulation of Interruption (steps 1 to 6)
Reversed Conductor Simulation (step 7)
Simulation of PE to Phase (step 8)
Contact ON Key at PRCD with Probe (step 10)
Measurement of Protective Conductor Current with a Current
Clamp Transformer (step 11)
To Next Page
Loading...
