Bluetooth Setup
The hoverboard features a Bluetooth speaker that can be paired with any
mobile device to play audio. The Bluetooth speaker is automatically enabled
when the hoverboard is turned on and will remain enabled and discoverable
as long as the hoverboard is powered on. Read the instructions below to
learn how to operate the hoverboard Bluetooth speaker.
1. To turn on the Bluetooth speaker, power on the hoverboard as normal.
2. Turn on the Bluetooth on the mobile device you wish to pair with your
Bluetooth speaker on the hoverboard will voice that a connection has
been made and the devices
are successfully paired.
4. Make sure your mobile device and the hoverboard remain within a
reasonable distance in order to maintain a connection. The Bluetooth
speaker will not far apart.
5. Play the music or audio you wish to hear on your mobile device, and it
will broadcast through the hoverboard Bluetooth speaker.