28
RECOMMENDED LUBRICANTS
Grease for Lineshafts, Turbine oils for Lineshafts,
Suction Bowl Bearings Suction Bowl Bearings
and Shaft Packings and similar applications
Operating Temperature Range 20º F to 120º F 20º F to 120º F
Required properties
Pour Point : 20º F or lower (base oil) 20º F or lower
Flash Point : 300º F or higher (base oil) 300º F or higher
100º F Viscosity : 450 SUS or higher (base oil) 150 SUS or higher
ASTM Dropping Point : 160º F or higher 32
Nitrile Rubber Swell : Minimal (up to 3%) Minimal (up to 3%)
Thickener Type: Calcium or Lithium
Thickener Percent: 15% Minimum
Manufacturer Recommended Standard Industrial Lubricants
Chevron Chevron
Chevron Texaco Corp.
Ulti-Plex Grease EP2 *Hydraulic Oil AW32
Texaco Texaco
Novatex EP2 *Regal EP 32
Mystik Oil & Grease Mystik Oil & Grease
Mystik JT-6 Grease (5484) *Mystik Turbax Oil 32 (1812)
CITGO Petroleum Corp.
Citgo Oil & Grease Citgo Oil & Grease
Premium Lithium EP2 Pacemaker Oil 32
Lyondell Lubricants Lyondell Lubricants
Litholine HEP Grease *Duro Oil 32
Mobil Mobil
Exxon Mobil Corp.
Mobilux Grease EP2 DTE Oil 24
Exxon Exxon
Lodok EP 2 *Nuto H Hydraulic Oil 32
76 Lubricants Co.
76 Lubricants 76 Lubricants
Multiplex EP Grease 2 Hydraulic Oil AW/D 32
Shell Oil
Shell Shell
Alvania EP Grease 2 *Tellus Plus Oil 32
Note: * in front of the oil grade means it is suitable for sub zero (F) temperature service.
Manufacturer Recommended Food Machinery Lubricants
Chevron Chevron
Chevron Texaco Corp.
#FM Grease EP2 *#Lubricating Oil FM32
Texaco Texaco
#Cygnus Grease 2 #Cygnus Hydraulic Oil 32
Mystik Oil & Grease Mystik Oil & Grease
#Mystik FG2 Grease (5607) #Mystik FG/AW 32 Oil (1931)
CITGO Petroleum Corp.
Citgo Oil & Grease Citgo Oil & Grease
#Clarion FG HTEP Grease #Clarion FG AW Oil 32
Lyondell Lubricants Lyondell Lubricants
Ideal FG 2 Grease #Ideal FG 32 Oil
Mobil Mobil
Exxon Mobil Corp.
#Mobil Grease FM102 DTE FM 32 Oil
Exxon Exxon
Foodrex FG 1 *Nuto FG Hydraulic oil 32
76 Lubricants Co.
76 Lubricants 76 Lubricants
76 Pure FM Grease 76 FM Oil 32
Note: 1. * in front of the oil grade means it is suitable for sub zero temperature (F) service.
2. Food machinery lubricants meet USDA H-1 requirements and FDA document 21 CFR 178.3570.
In addition, # in front of the product name means it is NSF 61 registered products.
To Next Page
Loading...
