Installation Manual
Stationary Trailer Refrigeration Unit
Page
28
71.01.121 / 00
Copyright by GOVI GmbH 2013. The reproduction of this document or any part there of is prohibited! The right is reserved to make technical changes in the course of further development!
Fig. 6-4 Mounting position at the trailer
NOTICE
Correct positioning is very important. Execute the procedures for positioning
with special diligence and consideration.
Incorrect positioning of the template may cause damage to the trailer or make
the trailer less attractive to potential customers.
The refrigeration unit may not be mounted closer than 4 in to the ceiling inside the
trailer box. The minimum distance to the outside ceiling is calculated by adding 4 in
to the thickness of the trailer‘s insulation and ceiling material(s).
There must be a minimal horizontal clearance of 9.1 in on both sides of the wall
opening of the refrigeration unit.
NOTICE
Only use pencils or erasable markers to draw lines. Other marking tools may
cause irrevocable damage to the surface of the trailer and refrigeration unit.
501 N. Grandview Avenue #135
Daytona Beach, FL 32118
Email: sales@govitrailerrefrigeration.com
Inc.
govitrailerrefrigeration.com
GOVI Inc.
Inc.
GOVI Inc. (USA)
GOVI GmbH (Germany)
To Next Page
Loading...