Installation Manual
Stationary Trailer Refrigeration Unit
Page
30
71.01.121 / 00
Copyright by GOVI GmbH 2013. The reproduction of this document or any part there of is prohibited! The right is reserved to make technical changes in the course of further development!
6.6 Attaching the refrigeration unit at the trailer
1
Eye bolt
2
Nylon sling
3
Snap hook
Fig. 6-5 Positioning the refrigeration unit
WARNING!
Always wear a helmet when lifting and positioning the refrigeration unit.
A helmet can prevent or mitigate head injuries caused by lifted loads striking
persons.
1.
Remove the plastic threaded bolts from the mounting holes on top of the refrig-
eration unit by turning them counterclockwise with a screwdriver and keep
these bolts in a box for reuse later on.
2.
Insert the eye bolts (1) in both mountings and turn them clockwise until they
are firmly fastened.
501 N. Grandview Avenue #135
Daytona Beach, FL 32118
Email: sales@govitrailerrefrigeration.com
Inc.
govitrailerrefrigeration.com
GOVI Inc.
Inc.
GOVI Inc. (USA)
GOVI GmbH (Germany)
To Next Page
Loading...