Installation Manual
Stationary Trailer Refrigeration Unit
Page
40
71.01.121 / 00
Copyright by GOVI GmbH 2013. The reproduction of this document or any part there of is prohibited! The right is reserved to make technical changes in the course of further development!
8.
Make sure that
•
the wall opening of the trailer and the bore holes are sealed firmly to pre-
vent moisture or air leakage,
•
neither the air outlets nor the air intakes of both the condenser and the
evaporator are obstructed by any material or object,
•
the main cover is installed securely on the refrigeration unit and the four
screws are firmly fastened,
•
the drain hose is firmly attached to the drain outlet,
•
the eye bolts at the top of the refrigeration unit have been replaced by the
plastic threaded bolts,
•
all bolts and screws are securely fastened,
•
the system was checked for leaking fluids or gas,
•
the system operates correctly.
9.
Turn power switch (2) into position “0” to switch off the refrigeration
10.
Complete Installation checklist in chapter 0
11.
12.
501 N. Grandview Avenue #135
Daytona Beach, FL 32118
Email: sales@govitrailerrefrigeration.com
Inc.
govitrailerrefrigeration.com
GOVI Inc.
Inc.
GOVI Inc. (USA)
GOVI GmbH (Germany)
To Next Page
Loading...