35
INSTALLING THE
IGNITOR BATTERY
Before using the gas burner for the
first time you’ll need to install an AAA
battery into the ignition module. To do
this remove the thermometer from the
front of the oven, the module will be
inside and to the left. Unscrew the cap
and place the battery in (negative end
first)before returning the thermometer
to its original position in the dock. You're
now ready to connect the gas bottle to
the oven.
Arc and Arc XL Technical Document AU.indd 35 07/11/2023 16:28:45
To Next Page
Loading...
